Showing posts with label gumpaste. Show all posts
Showing posts with label gumpaste. Show all posts
Thursday, 4 June 2015
Sunday, 10 March 2013
Monday, 25 February 2013
Tutorial: How to make an open storybook cake

Make the top two pages of the cake in advance with gumpaste.
Decide on the size of the rectangular cake then rolled out the gumpaste the
size of the base of the cake and then cut it into two pieces so that it looks
like two pages of an open book; these two pieces will go on top of the cake and
most of the decoration will go on top of these sheets.
Dry the two pieces with the top and bottom tips curled a bit, I also used the centre of kitchen tissue roll( cut in half) and inserted it underneath the sheets so that the sheets will look and dry wavy. IMPORTANT make sure you don’t stretch and pull the sheets otherwise the shape will be distorted.
Once it is dry do whatever decorations you want on it just make sure you are careful because it is very fragile.
Bake the cake and carve it on top to get the wavey effect ( make sure that the gumpaste sheets will fit on top snugly and also think and make allowance for buttercream and fondant that is going to go on top of the cake, careful when you are checking ) and cut out two small triangular bits out from both the sides( little triangular hole, the visible edge of the book cover of the cake will go around this). Cover with buttercream and fondant and use the Dresden tool to mark the sides - so that it looks like the pages in a book and paint the sides.
Now stick the already decorated gumpaste sheets on top and add the book marker and visible edge of the cover. Paint and decorate as required.
Canon EOS - 1D X cake Topper
Just realised that I hadn't added this to my Blog, one of my creations from last year ( Aug 2012 to be precise). This was one of the quickest cake topper I had made. Started the previous night and
finished the next morning. If I can't buy this(Canon EOS-1D X) yet... I
guess I can make it, a cut down version though ;-).
The size is about 5cmx5cm x7cm I think . This was just the topper for a 22cm dia cake .Writing and time was the biggest pain. My eyes were going blurry trying to write 'cos it was quite small( I am really not happy with the writing).
The size is about 5cmx5cm x7cm I think . This was just the topper for a 22cm dia cake .Writing and time was the biggest pain. My eyes were going blurry trying to write 'cos it was quite small( I am really not happy with the writing).
Saturday, 16 February 2013
Puzzle Cake
A cake for a very special and dear Uncle. A guy cake which did not need elaborate details. It was done at the same time as my niece's birthday cake.
Little Things a Girl Dreams of.......
Making this cake was an experience and a half......I had promised a cake for one of my special nieces back in August last year. While trying to gather information on what she likes from her mom, I was told that she might like a Jewellery box.....voila why didn't I think of that. So it was decided and dusted back in September that I was going to make a Jewellery box chocolate cake with purple in it (' cos my niece likes purple of course!! and the chocolate cake 'cos her Mom likes it!!! :-)) .
Starting this was the biggest hurdle for me, after a personal loss and a holiday, just couldn't get myself to do anything. Finally I forced myself to begin thinking that I had to do this for my niece, who ( I was told ) for some unknown reason thinks that I am the Queen of Designs and I spit out all these wonderful cakes just like that!!!. Well even if I am not..... I have to at least try or pretend to be ONE in her EYES!!!. So this is what I have come up with and hopes she likes my effort ;-) P.S. I also had a bit of a battle with RAIN which was not very helpful with the DRYING.
This cake is supposed to be a Trinket box, Jewellery box, Miniature Perfume bottles, Pieces of jewellery and a Wrist Watch placed on a table for the little LADY she is going to be.......
![]() |
Sunday, 9 December 2012
Iron Man Birthday Comic Strip
I was asked to make an Iron man cake by my little nephew, he was well organised, he brought home a big book on the Avengers to show me just in case I didn't know who "IRON MAN" was!. This was three or four months back. I had to have a think of this and finally decided on a comic strip..... This is the rough version
A journey back into nostalgia. Making this piece brought back so many fond old memories(These memories are more pronounced when there is a loss in the family.)
......when comics were the norm of the day for the kids back then and I
used to bug my parents to buy Tin Tin, Super heroes, Phanthom etc... I
don't know whether kids still read comic books these days...... but here goes my attempt.
Thursday, 18 October 2012
Tutorial - Kooba Valerie Handbag Cake and a scarf
This is first purse cake I have ever made, a Kooba valerie handbag. When I started out, I was very skeptical on how it was going to turn out...will it even look like a bag ?......The Birthday Girl ( a really lovely person ) ADORED it ...so I guess I like it too... I still think I could have refined it a bit more, made it more realistic if I had a bit more time( or maybe it was a good thing that I didn't have the time.. I might have ended up spoiling it...will write why later!!.
For all those budding cake decorators like me scouring the net, here is a little 'How to do a handbag' my way....or at least how I did it. Hope it will be helpful or atleast give you the confidence to try it or something similar :-).
1) Decide and Design
This is the most important bit, After deciding on the bag I was going to make, printed out pictures of it and used Parchment paper/baking paper to draw the side and top views, the joins and the handle so that I can use it to carve the cake and cut out the Fondant pieces
![]() |
2) Materials Used
- Cake of course ( Vegetarian Chocolate cake in this case)
- Gumpaste
- Pastillage
- Fondant
- Buttercream
- Rolling pin, and Board, Textured sheet
- Ball and Dresden, pin Tool, ridged wheel
- Craft Knife
- Square and Rectangle Cutters
- Water and paint brush
- Flower wire (I used #20 for the handle)
- Colour Paste, Luster Dust, Petal Dust
- Home-made Handle Dryer (Tissue Roll + Rectangular box + Cling Wrap)
- Parchment / baking paper
- Straws
3) Accents
I usually make whatever accents I can well before I start on the cake so that they are dried and ready. I also usually make extras just in case of breakage.
Buckles , Lock, and Logo : used pastillage for the buckles and gumpaste for the logo and Lock. Square and Rectangle cutters and craft knife were used to cut out the shapes then dresden, ball, pin tools to carve out the letters. Painted with gold luster dust + copper colour pasteHandles: Always.. always make extra. I was short of time and I made only two and I was very lucky to get away with it. It did break mind you but can you pick out where it did in the final picture? Word of warning with the handle... be very careful but do it quite quickly since the gumpaste /fondant will dry fast and cracks might appear
Roll out 50/50 fondant and gumpaste , emboss or texture using texture sheet or rolling pin and cut two straight pieces (Top & bottom) using the already cut parchment/baking paper as a guide for length and width. Get the bottom piece of the handle and work out where the buckle is going to sit.Now push the wire through the fondant strip just above where the buckle will sit ( as shown in the 2nd pic, make sure you don't bend the wire) . Do the same thing for the other side so the end bits of the wire can be seen( This is what is going to go into the cake). Now stick the already cut top piece to the bottom piece with the ends of the flower wire visible as shown using tiny amount of water. Stamp out two holes on each side below where the buckle should be.

You can thread though the buckles now or after the wire is bent and put on the home-made handle holder to get the conical shape that I wanted. Be very careful when doing this otherwise the ends might come off in your hands. To bend the wire, hold the end of the wire and bend ( don't press on the fondant/gumpaste) also bend the wire near where the buckles will be slightly so that exposed wire is partially vertical when going into the cake ( see pic above).
Scarf : Rolled out gumpaste really thin and cut it into a square and set it where it is going to be positioned and allowed it to dry and then paint it. I had mentioned before about doing too much and spoiling it ... this is an example I think. The first picture looks better.. the final scarf had too many colours on it and doesn't look as good !! ( to my eye that is.....)
4) Baking , Carving and the final bits and pieces

Carved out the shape using the already cut parchment/ baking paper (also checked the handles against the cake to make sure that they can be put on easily and also made allowance for the cake to be slightly larger with the fondant on). Layered it and crumb coated it using buttercream.
Then covered it with one piece of fondant ( Pink) so that it is easier to work with when I am sticking on the smaller pieces ( I know it is too much fondant, maybe when I am more confident, I will use just one layer).
After this I used mint green fondant and rolled it out and embossed and used the already cut parchment/ baking paper to cut out the shapes to stick it on ( Cut out slightly larger pieces to fold and crease it to make it look like a bag). Used the Ridged wheel to create the stitching effect.
Pushed through two straws on each side where the handle flower wire would go and cut it to size. Carefully put the handle on and made sure that it will not be moving around much. Put the rest of the accents on. If the wire shows through used the dresden tool and water to stick on small embossed pieces to cover it.

5) Finally My First hand Bag!!!

Carved out the shape using the already cut parchment/ baking paper (also checked the handles against the cake to make sure that they can be put on easily and also made allowance for the cake to be slightly larger with the fondant on). Layered it and crumb coated it using buttercream.
Then covered it with one piece of fondant ( Pink) so that it is easier to work with when I am sticking on the smaller pieces ( I know it is too much fondant, maybe when I am more confident, I will use just one layer).
After this I used mint green fondant and rolled it out and embossed and used the already cut parchment/ baking paper to cut out the shapes to stick it on ( Cut out slightly larger pieces to fold and crease it to make it look like a bag). Used the Ridged wheel to create the stitching effect.
Pushed through two straws on each side where the handle flower wire would go and cut it to size. Carefully put the handle on and made sure that it will not be moving around much. Put the rest of the accents on. If the wire shows through used the dresden tool and water to stick on small embossed pieces to cover it.

5) Finally My First hand Bag!!!
6) After the Cake Accident
While photographing the cake, the cake almost fell over and smashed, but some how I managed to save it with slight damage. The writing got damaged also so I ended up doing a simple tag quickly which doesn't look that bad If I may say so myself ;-)
Subscribe to:
Posts (Atom)












































